Many people like to build their own guitars and effects pedals. Getting a high quality finish is important if you want to replicate the look of a factory made guitar or effects pedal. This article will look at a method of getting a nice finish on a DIY homemade effects pedal.
Continue reading »Written by Alex on Thursday 4th June 2009
This effects unit was inspired and a slightly modified version of "Joe’s Easy Drive" by Joe Davisson from the Guitar Effects Projects website. I added a DPTP stomp switch into the schematic to allow you to turn the unit on and off (overdrive / bypass).
Continue reading »Written by Alex on Tuesday 29th August 2006
This article looks at a common alternative method to using press ‘n’ peel transfers, hand drawn layouts, or routed boards. This will cover each stage of the process in detail, showing you how to get a good result. You need access to a laser printer, and some copper clad board.
Continue reading »Written by Alex on Thursday 22nd June 2006
Our community extends all over the web. Why not subscribe and contribute via the following sites:
